Environmental Protection/Disposal - Bosch CRC200 User Manual

Fault affecting the heat source
Heat source faults are always displayed on the
heat source.
If there is a BUS connection between the user
interface and the heat source, faults are also
displayed on the user interface.
If in doubt, ask your contractor about the type
of connection.
Locking faults on the heat source can be rectified by
performing a reset.
▶ Reset the heat source.
See the operating instructions for the heat source for additional
information about eliminating faults affecting the heat source.
▶ If the fault cannot be rectified by a reset, contact your
contractor.
CRC200

Environmental protection/disposal | 23

9 Environmental protection/disposal
Environmental protection is one of the fundamental company
policies of the Bosch Group. We regard quality of performance,
economy and environmental protection as equal objectives.
Environmental protection laws and regulations are strictly
adhered to. To protect the environment, we use the best
possible technology and materials taking into account
economic points of view.
Packaging
For the packaging, we participate in the country-specific
recycling systems, which guarantee optimal recycling. All
packaging materials used are environmentally-friendly and
recyclable.
Old appliances
Old appliances contain resources that should be recycled.
The components are easy to separate and the plastics are
marked. This allows the various components to be sorted for
appropriate recycling or disposal.
6 720 821 652 (2017/05)