Table of Contents
Advertisement
4838 Reactor Controller
Explanation of Symbols
II
I
O
~
Safety Information
To avoid electrical shock, always:
1. Use a properly grounded electrical outlet of cor-
rect voltage and current handling capability.
2. Ensure that the equipment is connected to elec-
trical service according to local national electri-
cal codes. Failure to properly connect may create
a fi re or shock hazard.
3. For continued protection against possible haz-
ard, replace fuses with same type and rating of
fuse.
4. Disconnect from the power supply before main-
tenance or servicing.
To avoid personal injury:
5. Do not use in the presence of fl ammable or com-
bustible materials; fi re or explosion may result.
This device contains components which may
ignite such material.
6. Refer servicing to qualifi ed personnel.
Caution!
Do not use in hazardous atmospheres.
Provisions for Lifting and Carrying
Before moving the instrument, disconnect all con-
nections from the rear of the apparatus. Lift the
instrument by grabbing underneath each corner.
4
On position, full power heater switch
On position, half power heater switch
Off Position
Alternating Current (AC)
This CAUTION symbol may be present on the Product Instrumentation
and literature. If present on the product, the user must consult the ap-
propriate part of the accompanying product literature for more infor-
mation.
Protective Earth (PE) terminal. Provided for connection of the protec-
tive earth (green or green/yellow) supply system conductor.
Intended Usage
This controller has been designed for use with
pressure vessels and reactors. It has been de-
signed, built, and tested to strict physical and electri-
cal standards. However, it is the user's responsibil-
ity to install and operate it in conformance with local
pressure and electrical codes.
If the instrument is used in a manner not specifi ed
by
Company,
the
ed by the equipment may be impaired.
Cleaning & Maintenance
Periodic cleaning may be performed on the exterior
surfaces of the controller with a lightly dampened
cloth containing mild soap solution. All power
should be disconnected and the power cord should
be unplugged when cleaning the 4838 Controller.
There are no user serviceable parts inside the prod-
uct other than what is specifi cally called out and
discussed in this manual. Advanced troubleshooting
instructions beyond the scope of this manual can
be
obtained
by
order to determine which part(s) may be replaced or
serviced.
Ensure that any hot surfaces have had ad-
equate time to cool before cleaning or main-
taining the reactor and/or its components.
protection
provid-
calling
Company
in
Hide quick links:
Advertisement
Table of Contents
