Flowserve 682-53B System User Instructions page 25

682-53B System
ú
WARNING – HIGH PRESSURE: The accumulator can
STOP
burst if it is over pressurized. Fill the accumulator
slowly; check the pressure gauge regularly.
6. Fill the accumulator with N
that is related to the ambient temperature, is reached.
Refer to the vendor documentation in the appendix for
the correct setting.
7. Remove the charge unit from the accumulator.
8. Make sure the drain valve is closed.
9. Check set-up, and restart system (refer to sections 7.1
and 7.2).
SSIOM000742-00 (EN/AQ) November 2022
until the required pressure
2
Flowserve.com 25