Installation; Introduction; Installation Requirements; Safety Considerations - Flowserve 682-53B System User Instructions

682-53B System

6 Installation

6.1 Introduction

Before installing the system, make sure you have read and
understood the Installation requirements in this section. If
you have any questions regarding the installation of your
system, contact your local Flowserve representative.

6.2 Installation requirements

6.2.1 Safety considerations

Position the 682-53B as close to the seal as possible.
Make sure there is sufficient room for:
• Evacuation of the Plant in case of an emergency (do
not block walkways and emergency exits)
• Safe operation and maintenance of the system
c
DANGER – RISK OF EXPLOSION: If the system is
being installed in a hazardous area, there could be
an explosion risk. Make sure all instrumentation has
the adequate explosion protection.
If the system is being installed in a confined area, make
sure there is adequate ventilation.
c
DANGER – SUFFOCATION HAZARD: Breathing
N in a confined space can result in sudden
2
unconsciousness or death. Take extra care when
working in confined areas.
Adequate ventilation is required for:
• Safe filling of the accumulator with N
• Correct cooling of the system
SSIOM000742-00 (EN/AQ) November 2022
2
Flowserve.com 14