682-53B System
5 Transport and Storage Requirements
Full storage procedure (FTA106) can be obtained from
Flowserve representative.
Below is an extract of the procedure.
Transport and
storage criteria
Transportation
Suspect damaged during
transportation
Warehouse requirements
Long-term storage
Preserving installed systems
SSIOM000742-00 (EN/AQ) November 2022
Requirements
The system must be transported and stored in the unopened, original shipping box.
Instructions on the shipping box shall be followed.
Systems that have been dropped, or have been subjected to heavy impacts during transport,
must not be installed. The Flowserve representative shall be contacted.
The warehouse must be dry and dust free. The system should not be exposed to large
temperature fluctuations, high humidity or radiation and shall be stored in the original box.
After a storage period of 1 year, the system must be inspected for its "as new" properties.
This applies particularly to the instrumentation and bladder of the accumulator.
The preserving medium must not damage the installed system, for example by fouling or
harming the components and mechanical seal. If you are not sure which preserving medium
to use, contact Flowserve representative for preserving procedure.
Flowserve.com 13