Subscribe to Our Youtube Channel
Related Manuals for KIBI F202
Summary of Contents for KIBI F202
- Page 1 Model: F202 INSTALLATION GUIDE DIMENSIONS 6 7/16 " 4 1/8 " 1 5/8 " 2 7/16” (Φ62 mm) 2 7/16 (max 62 mm) G1 1/4 Thread 4 13/16 " 1 4/16” 1 15/16 " (Φ32 mm)
- Page 2 FAUCET INSTALLATION Remove the mounting hardware from the Shut off water suppliers. Remove the old faucet, clean mounting pipe. the mounting surface. Note: For first time install, flush the pipes first by open the angel valve to run 60s. Put the rubber O-ring into the bottom gap of From below the sink, Slide rubber washer, metal faucets then Insert faucet into faucet hole.
- Page 3 POP-UP INSTALLATION Remove all components from drain piece including: Insert thick silicone washer and hard washer over the thin and thick silicone washer, hard washer, drain nut exposed mail threaded area and screw drain nut onto and tail piece. drain. Do not overtighten. Insert drain and thin silicone washer into basin.
- Page 4 TROUBLE SHOOTING If you’ve followed the instructions carefully and your faucet still does not work properly, take these corrective steps. Problem Cause Action Unscrew aerator to check rubber packing or replace aerator. Low flow Aerator or fliter may be clogged (Note: some models require wrench to remove aerator.) Faucet leaks from under Bonnet nut has come loose or...
Need help?
Do you have a question about the F202 and is the answer not in the manual?
Questions and answers