KIBI Lowa KKF2001 Installation Manual

TROUBLE SHOOTING
If you've followed the instructions carefully and your faucet still does not work properly, take these corrective steps.
Problem Cause
Aerator(4) or fliter(8) may be
Low flow
clogged
Bonnet(2) nut has come loose
Faucet leaks from
or cartridge(3) needs to be
under handle
reseated
If leak persists, faucet
leaks from spout
Cartridge may need to be
outlet, water does not
adjusted or replaced
shut off
completely
Leaking between Spray head may be loose or
spray head and the washer is not seated correctly
hose in the hose connection
Weight may be installed incor-
Hose does not retract
rectly
CLEANING AND CARE
Clean the faucet often with a soft cloth to keep it looking like new. For heavy cleaning you can use mild liquid deter-
gents or non-abrasive liquid polisher. Rinse with water and dry with a soft cloth. Avoid abrasive cleaners, steel wool
and harsh chemicals as these will dull the finish and void your warranty.
LIMITED LIFETIME WARRANTY
KIBI provides its customers with an extensive warranty as a result of our excellent workmanship and high quality
components used in our products.
Mechanical warranty: A limited lifetime warranty is provided on all mechanical parts to be free from manufacturing
defects in materials and workmanship under normal use for as long as the original purchaser owns their home.
Finish warranty: A 5-year warranty is provided on all KIBI faucet finishes to the original purchaser against manu-
facturing defects in materials and workmanship.
At its sole discretion, KIBI will repair or replace any part or finish that proves to be defective in material and/or
workmanship under normal installation, use and service.
This warranty is extended to the original consumer owner, but does not cover installation or any other labor
charges. In no event shall KIBI be liable for any incidental, consequential or special damages, installation cost,
labor, travel time, freight costs incurred, lost profits, or contingent liabilities. KIBI makes no representation that its
products comply with any or all local building or plumbing codes. It is the consumer's responsibility to determine
local code compliance.
Action
Unscrew aerator to check rubber packing or replace
aerator.
(Note: some models require wrench to remove aerator.)
Remove handle and cap. Using a wrench, ensure bonnet
nut is tight.
SHUT OFF WATER SUPPLIES.
Replace cartridge(3). When reinstalling parts, make sure
bonnet nut (2) is tightened securely with a wrench.
WARNING: Failure to securely tighten bonnet nut with a
wrench could result in water damage.
Tighten spray head by hand until snug. Make sure washer
is seated correctly.
Readjust weight on hose.
Installation Guide
www.kibiusa.com
Lowa
KKF2001