Carton Contents - Craftsman 137.21194 Operator's Manual

UNPACKING YOUR MITER SAW
WARNING
!
To avoid injury from unexpected
starting or electrical shock, do not
plug the power cord into a source
of power during unpacking and
assembly. This cord must remain
unplugged whenever you are
working on the saw.
1. Remove the miter saw from the
carton.
IMPORTANT: Do not lift miter saw
by the trigger switch handle. It
may cause misalignment. Only lift
machine by the base hand holds.
2. Place the saw on a secure
stationary work surface.
Hold-down clamp

CARTON CONTENTS

Miter saw
Dust bag
3. Separate all parts from the packing
material. Check each one with
the illustration to make certain all
items are accounted for, before
discarding any packing material.
WARNING
!
●
If any part is missing or
damaged, do not attempt to
assemble the miter saw, or
plug in the power cord until
the missing or damaged part
is correctly replaced. Call
1-800-843-1682 for missing or
damaged parts.
●
To avoid electric shock, use
only identical replacement parts
when servicing double insulated
tools. Call 1-800-4-MY-HOME
replacement parts.
Support bracket assembly
Blade wrench
13 13
for
®
Miter handle