Craftsman 137.21194 Operator's Manual page 35

Bevel/Miter Settings
KEY BEVEL
SETTING
IL 33.9°
IR 33.9°
OL 33.9°
OR 33.9°
MITER
SETTING
31.6° Right 1. Position top of molding against fence.
2. Miter table set at RIGHT 31.6°.
3. LEFT side is finished piece.
31.6° Left 1. Position bottom of molding against fence.
2. Miter table set at LEFT 31.6°.
3. LEFT side is finished piece.
31.6° Left 1. Position bottom of molding against fence.
2. Miter table set at LEFT 31.6°.
3. RIGHT side is finished piece.
31.6° Right 1. Position top of molding against fence.
2. Miter table set at RIGHT 31.6°.
3. RIGHT side is finished piece.
TYPE OF CUT
Inside corner-Right side
Outside corner-Left side
Outside corner-Right side
35 35
Inside corner-Left side