D-Link Xtreme N DIR-614 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Network Router
  5. Xtreme N DIR-614
  6. User manual
D-Link Xtreme N DIR-614 User Manual

D-Link Xtreme N DIR-614 User Manual

Gigabit router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DIR-614

Advertisement

Table of Contents
loading

Related Manuals for D-Link Xtreme N DIR-614

Summary of Contents for D-Link Xtreme N DIR-614

  • Page 1 DIR-614...

  • Page 2: Preface

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description March 3, 2010 • New Revision Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.

  • Page 3: Table Of Contents

    Manual Configuration ................15 Wi-Fi Protected Setup (WPS) ............41 Dynamic (Cable) ................15 Advanced Network Settings ............42 Internet Setup ..................16 UPnP ....................42 PPPoE (DSL) ..................16 Internet Ping Block.................42 PPTP ....................17 Internet Port Speed ...............42 L2TP .....................18 Multicast Streams ................42 D-Link DIR-614 User Manual...
  • Page 4 Update Firmware ..................64 Check your IP address ..................96 DDNS ......................65 Technical Specifications ..............98 System Check ..................66 Schedules ....................67 Contacting Technical Support ............99 Device Information ................68 Warranty ..................100 Log ......................69 Stats ......................70 Registration ...................106 Active Sessions ..................70 Wireless ....................71 D-Link DIR-614 User Manual...

  • Page 5: Product Overview

    Section 1 - Product Overview Product Overview Package Contents D-Link DIR-614 Xtreme N Router with ™ 3 Detachable Antennas Power Adapter CAT 5 Ethernet Cable CD-ROM Note: Using a power supply with a different voltage rating than the one included with the DIR-614 will cause damage and void the warranty.

  • Page 6: System Requirements

    Visit www.java.com to download the latest version. Computer with the following: CD Installation Wizard • Windows 7, Vista , or XP with Service Pack 2 ® Requirements • An installed Ethernet adapter • CD-ROM drive D-Link DIR-614 User Manual...

  • Page 7: Introduction

    ULTIMATE PERFORMANCE The D-Link Xtreme N™ Router (DIR-614) is a 802.11n compliant device that delivers real world performance of up to 650% faster than an 802.11g wireless connection (also faster than a 100Mbps wired Ethernet connection). Create a secure wireless network to share photos, files, music, video, printers, and network storage throughout your home.

  • Page 8: Features

    * Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-614 User Manual...

  • Page 9: Leds

    A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during Local Network’s LED data transmission. Insert a USB flash drive with WCN information. The LED will blink 3 times if it successfully transfers the WCN LED wireless settings. D-Link DIR-614 User Manual...

  • Page 10: Installation

    If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-614 User Manual...

  • Page 11: Wireless Installation Considerations

    The key to maximizing wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

  • Page 12: Getting Started

    CD-ROM drive). When the autorun screen appears, click Install. Note: It is recommended to write down the SSID and Security Key, followed by the login password on the provided CD holder. D-Link DIR-614 User Manual...

  • Page 13: Configuration

    Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).

  • Page 14: Setup Wizard

    If you want to enter your settings without running the wizard, click Manual Configuration and skip to page 15. Click Launch Internet Connection Setup Wizard to begin. If you want to configure your wireless settings, click Launch Wireless Security Setup Wizard and skip to page 74. D-Link DIR-614 User Manual...
  • Page 15 Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. Select the type of Internet connection you use and then click Next to continue. D-Link DIR-614 User Manual...
  • Page 16 Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If you selected PPTP, enter your PPTP username and password. Click Next to continue. D-Link DIR-614 User Manual...
  • Page 17 Click Connect to save your settings. Once the router is finished rebooting, click Continue. Please allow 1-2 minutes to connect. Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet. D-Link DIR-614 User Manual...

  • Page 18: Manual Configuration

    Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features. Host Name: The Host Name is optional but may be required by some ISPs.

  • Page 19: Internet Setup

    Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-614 User Manual...

  • Page 20: Pptp

    Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-614 User Manual...

  • Page 21: L2Tp

    Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-614 User Manual...

  • Page 22: Static (Assigned By Isp)

    Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-614 User Manual...

  • Page 23: Wireless Settings

    Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-614. If Invisible is selected, the SSID of the DIR-614 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-614 D-Link DIR-614 User Manual...

  • Page 24: Network Settings

    Local Domain: Enter the Domain name (Optional). Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-614 User Manual...

  • Page 25: Dhcp Server Settings

    This feature allows the configuration of a NetBIOS ‘domain’ name under which network hosts operates. This setting has no effect if the ‘Learn NetBIOS information from WAN’ is activated. ” NetBIOS Mode Type: Select the different type of NetBIOS node: Broadcast only, Point-to-Point, Mixed-mode, and Hybrid. Primary/Secondary WINS Enter your Primary (and Secondary) WINS IP address(es). IP Address: D-Link DIR-614 User Manual...

  • Page 26: Dhcp Reservation

    IP Address; in that case, you may still need to extend the “DHCP IP Address Range” to address the issue, it is located in the DHCP Server section. Reserve: The Reserve option converts this dynamic IP allocation into a DHCP Reservation and adds the corresponding entry to the DHCP Reservations List. D-Link DIR-614 User Manual...

  • Page 27: Usb Settings

    Note: If using the Network USB option, users will need to install the Network USB Utility into the computers to share the USB device through the router. USB Settings: Choose between these two configuration: Network USB and WCN Configuration. Network USB: Please set the Network USB Detection interval time. Note: Please see the SharePort Manual on the CD for more information. D-Link DIR-614 User Manual...

  • Page 28: Virtual Server

    Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are pre-defined virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service. For a list of ports for common applications, please visit http://support.dlink.com/faq/view.asp?prod_id=1191. D-Link DIR-614 User Manual...
  • Page 29 The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-614 User Manual...

  • Page 30: Port Forwarding

    The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-614 User Manual...

  • Page 31: Application Rules

    The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DIR-614 User Manual...

  • Page 32: Qos Engine

    Frame Relay Network causes the measured uplink speed to be reported slightly lower than before on such connections, but gives much better results. Detected xDSL: When Connection Type is set to automatic, the automatically detected connection type is displayed here. D-Link DIR-614 User Manual...

  • Page 33: Network Filters

    To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click << to copy that MAC Address. D-Link DIR-614 User Manual...

  • Page 34: Access Control

    P2P utilities or games. Add Policy: Click the Add Policy button to start the Access Control Wizard. Access Control Wizard Click Next to continue with the wizard. D-Link DIR-614 User Manual...
  • Page 35 Enter the following information and then click Next to continue. • Address Type - Select IP address, MAC address, or Other Machines. • IP Address - Enter the IP address of the computer you want to apply the rule to. D-Link DIR-614 User Manual...
  • Page 36 Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. D-Link DIR-614 User Manual...

  • Page 37: Website Filters

    To use this feature, enter the text string to be blocked and click Save Settings. The text to be blocked will appear in the list. To delete the text, click Clear the List Below. Website URL/Domain: Enter the keywords or URLs that you want to block (or allow). Any URL with the keyword in it will be blocked. D-Link DIR-614 User Manual...

  • Page 38: Inbound Filters

    Inbound Filter Rules List: This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. D-Link DIR-614 User Manual...

  • Page 39: Firewall Settings

    Firewall Settings A firewall protects your network from the outside world. The D-Link DIR-614 offers a firewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose to expose a computer, you cam enable DMZ.

  • Page 40: Application Level Gateway Configuration

    Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. D-Link DIR-614 User Manual...

  • Page 41: Routing

    A value 1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-614 User Manual...

  • Page 42: Advanced Wireless Settings

    Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create higher data loss. D-Link DIR-614 User Manual...

  • Page 43: Wish Settings

    A WISH Rule identifies a specific message flow and assigns a priority to that flow. For most applications, the priority classifiers ensure the right priorities and specific WISH Rules are not required. WISH supports overlaps between rules. If more than one rule matches for a specific message flow, the rule with the highest priority will be used. D-Link DIR-614 User Manual...

  • Page 44: Wi-Fi Protected Setup (Wps)

    PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well. Add Wireless Device Start the wizard. Wizard: D-Link DIR-614 User Manual...

  • Page 45: Advanced Network Settings

    DSL modems may require you to set the UPnP port speed to 10Mbps. Internet Ping Block Internet Port Speed Multicast Streams Multicast streams: Check the box to allow multicast traffic to pass through the router from the Internet. D-Link DIR-614 User Manual...
  • Page 46 Enable Routing Between Check to allow network connectivity between the different Zones: zones created. Security Mode: Select the type of security or encryption you would like to enable for the guest zone. D-Link DIR-614 User Manual...
  • Page 47 Section 3 - Configuration IPv6 Link-Local Connectivity My IPv6 Connection: Select Link-Local Only from the drop-down menu. LAN IPv6 Address Displays the IPv6 address of the router. Settings: D-Link DIR-614 User Manual...
  • Page 48 Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-614 User Manual...
  • Page 49 LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateless. Refer to the previous page for Stateful. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: D-Link DIR-614 User Manual...
  • Page 50 Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-614 User Manual...
  • Page 51 LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateless. Refer to the previous page for Stateful. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: D-Link DIR-614 User Manual...
  • Page 52 Enter the primary and secondary DNS server addresses. Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. D-Link DIR-614 User Manual...
  • Page 53 Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-614 User Manual...
  • Page 54 Select either Obtain DNS server address automatically or Use the following DNS Address. Primary/Secondary DNS Enter the primary and secondary DNS server addresses. Address: LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. D-Link DIR-614 User Manual...
  • Page 55 Section 3 - Configuration Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateful (DHCPv6) or Stateless. Router Advertisement Lifetime: Enter the Router Advertisement Lifetime (in minutes). D-Link DIR-614 User Manual...
  • Page 56 Enter the start IPv6 Address for the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-614 User Manual...
  • Page 57 LAN Link-Local Address: Displays the Router’s LAN Link-Local Address. Enable Autoconfiguration: Check to enable the Autoconfiguration feature. Autoconfiguration Type: Select Stateless. Refer to the previous page for Stateful. Router Advertisement Enter the Router Advertisement Lifetime (in minutes). Lifetime: D-Link DIR-614 User Manual...
  • Page 58 Enter the start IPv6 Address for the DHCPv6 range for your Start: local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your End: local computers. Pv6 Address Lifetime: Enter the Router Advertisement Lifetime (in minutes). D-Link DIR-614 User Manual...
  • Page 59 Displays the Router’s LAN Link-Local Address. Enable Check to enable the Autoconfiguration feature. Autoconfiguration: Autoconfiguration Type: Select Stateful (DHCPv6) or Stateless. Refer to the next page for Stateless. IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes). D-Link DIR-614 User Manual...
  • Page 60 Displays the Router’s LAN Link-Local Address. Address: Enable Check to enable the Autoconfiguration feature. Autoconfiguration: Autoconfiguration Select Stateless. Refer to the previous page for Stateful. Type: IPv6 Address Lifetime: Enter the Router Advertisement Lifetime (in minutes). D-Link DIR-614 User Manual...
  • Page 61 Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range Enter the end IPv6 Address for the DHCPv6 range for your Start: local computers. IPv6 Address Lifetime: Enter the Router Advertisement Lifetime (in minutes). D-Link DIR-614 User Manual...

Table of Contents