Related Manuals for DUUN TK105
Summary of Contents for DUUN TK105
- Page 1 Duun Industrier as 7630 Åsen, Norway www.duun.no Wood grab TK105 Instruction manual Series number.:from 140001...
-
Page 2: Machine Identification
Congratulations with your Duun TK105 wood grab. All Duun tractor operated machines has been engineered and tested in close cooperation with end users of our products. This in order to develop reliable and user friendly equipment Please read the instructions manual before you start using the grab... -
Page 3: Table Of Contents
Contents MACHINE IDENTIFICATION SAFETY WARRANTY TERMS SPECIFICATIONS PREPARATION FOR USE PRACTICAL USE ADJUSTMENTS AND MAINTENANCE DECLARATION OF CONFORMITY... -
Page 4: Safety
SAFETY You should always work with care when you employ agricultural machinery. Read and observe the safety instructions in this binder. Your safety is your responsibility! Be particularly aware of warning signs with this symbol it marks measures that must be carried out in order to avoid accidents. The symbol appears in the instruction manual and on warning signs on the machine. -
Page 5: Warranty Terms
Replaced parts are to be kept until a decision has been made with reference to the claim and the replaced parts are to be forwarded to Duun Industrier as for assessment if so required. As the employment of the product is beyond our control, we may only guarantee the quality and do not accept liability for the product's general performance. -
Page 6: Specifications
Specifications Measures indicated at drawings are in millimeters.. Weight : 235kg... -
Page 7: Preparation For Use
Preparation for use The wood grab is delivered with either Trima or Euro fastening brackets for the loader. These brackets are screw mounted to the grab and must be fastened before first time use. Brackets to be bolted to fastening holes as indicated The grab then had to be connected to the loader and locked with the loaders locking mechanism. -
Page 8: Adjustments And Maintenance
Adjustments and maintenance After 5 hours use – re-tighten all screw connections. Greasing points are illustrated. -
Page 9: Declaration Of Conformity
Declaration of conformity...
Need help?
Do you have a question about the TK105 and is the answer not in the manual?
Questions and answers