Flush Mounting On Metal Seamed Roofs - oventrop OVSOL System 5 Manual

Flush Mounting on Metal Seamed Roofs

Roof Mounting Kit ORMK-M
Mounting of Collector Feet
For seamed metal roofs.
Install the fixing components on the bite seam, tighten
the bolt and the back plates clamp on the bite seam.
No drilling is required.
Use spacer plate if necessary.
Place frame to the metal roof collector foot and then
fasten the bolts through the forth frame hole as the
drawing specifies. Tighten bolts to secure frame.
10