Table of Contents
Advertisement
en Installation instructions
Screw the rails onto the bottom of the unit.
10.
Note: If an appliance measuring 90 cm is installed
11.
in a unit with a width of 90 cm, skip the next two in-
stallation steps and follow the instructions in the ad-
ditional accessory pack.
Screw in the screw from below and tighten the nut.
Align the appliance to the hob and tension it
12.
against the worktop .
Insert the drip tray and snap it into place.
13.
22
Plug the cables into the fan box.
14.
Carefully insert the glass pane as far as it will go
15.
into the guides.
Connect the appliance to the power supply.
16.
a If you have installed the appliance and have estab-
lished the power connection, the glass pane moves
downwards and appliance closes.
Insert the grease filters.
17.
→ "Fitting the grease filters", Page 13
Advertisement
Table of Contents
