Table of Contents
Advertisement
en Troubleshooting
Reset the saturation indicator.
5.
→ "Resetting the saturation indicator", Page 9
11 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
→ "Customer Service", Page 15
11.1 Malfunctions
Fault
The appliance is not
working.
The appliance flap
does not close com-
pletely.
The button illumina-
tion does not work.
The lighting does not
1
work
.
The top two LEDs
flash in the left-hand
control panel (7).
1
Depending on the appliance specifications
14
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
▶
The glass panel is not inserted correctly.
Insert the glass panel carefully as far as it will go.
▶
Liquid flows into the appliance.
Pull out the mains plug or switch off the appliance at the circuit breaker in the fuse box.
▶
Empty the drip trays and remove the grease filters cartridges. → Page 12
▶
Dry all accessible places.
▶
Leave the appliance flap open and restart the appliance only after 48 hours.
▶
Insert the drip tray and the grease filters cartridges.
▶
The glass panel is removed, and the appliance has been operated.
Insert the glass panel and disconnect the appliance from the power supply for ap-
▶
prox. one minute.
An object is jammed in the appliance.
Disconnect the appliance from the electricity.
▶
Carefully open the flap and remove the object that has become jammed.
▶
Close the flap carefully.
▶
Connect the appliance to the power supply.
▶
The control unit is faulty.
Call the after-sales service.
▶
→ "Customer Service", Page 15
Different causes are possible.
Call the after-sales service.
▶
→ "Customer Service", Page 15
Defective LED lights may be replaced by the manufacturer, their customer service or a
▶
qualified technician (electrician) only.
The grease filters are saturated.
Clean the grease filters.
▶
→ "Cleaning grease filters in the dishwasher", Page 13
→ "Cleaning grease filters manually", Page 13
→ "Familiarising yourself with your appliance", Page 7
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by trained specialist staff.
Advertisement
Table of Contents
