Table of Contents
Advertisement
EMPTYING THE DUST CUP
IMPORTANT: Unplug the cord before performing any maintenance�
NOTE: Empty the dust cup when or before the debris reaches the max fill line�
To remove Dust Cup, press release button on
top of the pod� Tilt dust cup away from wand,
then lift to remove�
To remove collected debris from Lint Screen,
press top release buttons either side of the
handle and lift handle to access screen�
12
s h a r kc l e a n . c o . u k
To empty debris into the bin, press lower
release button and bottom of dust cup will
drop open�
To reinstall, place bottom of dust cup into
pod and then tilt until it clicks into place�
CLEANING AND REPLACING THE FILTERS
CLEANING FILTERS
Regularly wash, dry and replace the filters
to maintain your vacuum's suction power.
To prevent damage from cleaning chemicals,
rinse filters with cold water only� Allow all
filters to air-dry for at least 24 hours before
reinstalling them to prevent liquid from being
drawn into electric parts�
IMPORTANT: DO NOT use soap when
cleaning the filters�
CLEAN PRE-MOTOR FILTERS EVERY MONTH
Filter
Housing
CLEAN POST MOTOR FILTER EVERY YEAR
Lie unit flat on the floor so you can see the post motor filter underneath� With the dustcup
removed, press button on filter housing and pull forward� Remove post motor filter by pressing
black tab until it clicks and is released from the unit� To reinstall, insert the filter into the unit by
clicking into place and re-attach the filter housing�
NOTE: The pre-motor filters should be replaced every 2�5 years� The post-motor filter should be replaced every 3 years�
Remove Dust Cup, then lift out Filters�
Filter
Door
Release
Filter
s h a r kc l e a n . c o . u k
13
Advertisement
Table of Contents
