Know Your Sander; Features; Operation - Craftsman 315.277011 Owner's Manual

KNOW YOUR SANDER
See Figure 1.
Before attempting to use your sander, familiarize
yourseit with all operating features and safely
requirements.
Your sander has a comfortable paJm gdp handle that
provides maximum one-hand control and comfort, plus
it reduces operator fatigue during continuous sanding
operations; it has quick action paper damps; it is
suitable for sanding with coarse, medium, and fine grit
sandpaper;, and has a built-in dust collection that
collects dust through punched holes in the sandpaper
and oushion.
SWITCH
This tool has a simple switch control. To tum your
sander ON, depress the switch button as shown in
figure 1. Depress the switch button in the opposite
direction to turn your sander OFF.
SWITCH
ELECTRICAL CONNECTION
Your sander has a precision built electric motor. It
should be connected to a power
supply
that ts 120
volts, 60 Hz, AC only (normal household current).
De not operate this tool on direct current (DC). A
substantial voltage drop will cause a Ioes of power and
the motor will overheat. If your tool does not operate
when plugged into an outlet, double-check the power
supply.
A WARNING: Do not allow familiarity with your
sander to make you careless. Remember that a
careless fraction of a second is sufficient to inflict
severe injury.
APPUCATIONS
(Use only for the purposes listed below)
El Sandingon woodsurfaces.
• Removing restfromandsanding steelsurfaces.
ON OFF
SWITCH
PAPERCLAMP
CUSHION
LEVER
TAB
DUST
BAG
PAPERPUNCH Fig. 1
_k WARNING: Yoursandershould neverbe connected to powersupply whenyou am assembling peha,
makingadjustments, assembling or raplanlng _ndpeper, cleaning,or whennot In usa. Disconnecting your
sander will preventaccidentalstarting that couldcausesedous personalinjury,
8