Table of Contents
Advertisement
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating your sander. Failure to do so
could result in dust, shavings, loose particles or foreign
objects being thrown into your eyes, causing possible
serious injury.
KNOW YOUR SANDER
Before attempting to use your sander, familiarize yourself
with all operating features and safety requirements.
See
Figure I.
SWITCH
See Figure 1.
Your sander is equipped with a simple switch control located
on the front of your sander. To turn your sander ON, depress
the switch button to the ON position as shown in figure 1.
TO turn your sander OFF, depress lhe switch bulton in the
opposite direction to the OFF position.
Be sure your sander is not ON before connecting to
power supply source.
WARNING:
If any parts are missing, do not operate your sander until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
ELECTRICAL
CONNECTION
Your sander has a precision built electric motor. It should be
connected to a power supply that is 120 volts, 60Hz, AC
only (normal household
current). Do not operate this tool
on direct current (DC). A voltage drop of more than 10 percent
will cause a loss of power and the motor will overheat. If
your tool does not operate when plugged into an outlet,
double-check the power supply.
WARNING:
TO TURN
SANDER OFF
SWITCH
TO TURN
SANDER ON
SANDPAPER
PAPER
CLAMPLEVER
Page 5
is sufficient to inflictsevere injury.
CUSHION
Fig. 1
Advertisement
Table of Contents
