Table of Contents
Advertisement
Table continued from last page
Problem:
PF will appear on the display
unit:
E0 or E8 appears on the dis-
play unit:
E1 or E2 appears on the dis-
play unit:
E9 appears on the display unit: •
E4 appears on the display unit: •
E5 appears on the display unit: •
If the above tips do not resolve your problem, call the nearest authorized service centre and state the
type, model, and serial number indicated on the appliance rating plate or label located in the appliance
interior.
38
Cause or remedy:
•
An extended power failure.
•
Sensor keys are not responding. Call a service centre for repair.
•
Until the appliance is repaired by a service technician, the ap-
pliance will operate in safe mode. The appliance will automatic-
ally preserve the most suitable temperature for each compart-
ment.
•
Temperature sensor error or fault. Call a service centre for repair.
Until the appliance is repaired by a service technician, the ap-
pliance will operate in safe mode. The appliance will automatic-
ally preserve the most suitable temperature for each compart-
ment.
Door was open for too long. Close the door.
•
If the lighting in the compartment does not function either, then
there is a door sensor fault. Call a service centre to arrange a
repair. The appliance will operate in safe mode until it is re-
paired. The appliance will automatically preserve the most
suitable temperature for each compartment.
Compartment fan failure. Call a service centre for repair. The
appliance cannot operate normally. Transfer the food to a cool
place and switch off the appliance.
Condenser compartment fan failure. Call a service centre for
repair. The appliance cannot operate normally. Transfer the
food to a cool place and switch off the appliance.
Advertisement
Table of Contents
