12. Unscrew the bottom hinge (14). Remove the adjustable foot (13) from the bottom hinge pin (11).
Unscrew the pin (11) from the bottom hinge and screw it onto the opposite side of the hinge.
13.
14. Place the bottom door onto the bottom hinge and hold them in place. Rotate the middle hinge by
180°. Place the washer in the correct position and adjust the position of the middle hinge so that
you can install and fix the bottom door.
15.
16.
17. Open the top door and replace the door rack; then, close the door.
16
Use the screws to attach the foot from step 11 and the bottom
hinge from step 12 to the opposite side.
Correctly position the top door, run the connector (A) through the
hole in the top hinge (3) and use the screws (2) to attach it. Hold
the top door in place while positioning them. Reconnect the
connector (A).
Replace the upper hinge cap (1).