Intensive Freezing (Freezer Compartment) - Hisense RB424N4CFC Detailed Instructions For Use

To deactivate: to deactivate the intensive cooling (super cool) function, press the E key. You will hear
a beep and the SUPER COOL indicator will no longer be lit. If the function is not deactivated manually,
it will be deactivated automatically after approximately twelve hours.
INFORMATION!
When the intensive cooling (super cool) function is activated, the appliance will operate with
maximum power. During this time, operation may be temporarily somewhat louder.

Intensive freezing (freezer compartment)

INFORMATION!
Use this setting after switching on the appliance for the first time, before cleaning, or before
inserting a large amount of food.
• While the intensive freezing (fast freeze) function is activated, refrigerator compartment temperature
can be set or adjusted as usual.
• To change the freezer compartment temperature while the intensive freezing (fast freeze) function
is activated, however, the intensive freezing (fast freeze) function has to be deactivated first by
pressing the H key.
To deactivate: to deactivate the intensive freezing (fast freeze) function, press the H key. You will
hear a beep and the SUPER FREEZE indicator will no longer be lit. If the function is not deactivated
manually, it will be deactivated automatically after approximately two days.
INFORMATION!
When the intensive freezing (fast freeze) function is activated, the appliance will operate with
maximum power. During this time, operation may be temporarily somewhat louder.
22
To activate: to activate the intensive freezing (fast freeze) function, press
the H key. You will hear a beep and the SUPER FREEZE indicator will
light up.
Extreme freezing (upper drawer of the freezer compartment): This
feature only works in the upper drawer of the freezer compartment. It
relies on intensive supply/blowing of cool air. Faster freezing will retain
more vitamins, minerals, and nutrients in the food for a longer period of
time.
Outer segments of the digit on the C display unit will light up in
succession. At first, only the first segment will be lit (see figure above);
then, successive segments will light up in the clockwise direction.
Towards the end of this function's operation, all outer segments on the
C display unit will be lit up.