Procedures For Close-Up Flash Operation - Nikon R1 Instruction Manual

3

Procedures for close-up flash operation

Procedures for dual-light close-up flash operation
Display in dual-light close-
up flash operation
MODE A
NO AF-ILL
SE
READY
MODE A B
NO AF-ILL
SEL
READY
70
1
Press the [ON/OFF] buttons to turn on the camera,
SU-800 and SB-R200.
• Ensure that the red ready-lights on the SU-800 and
• Confirm that Wireless flash, close-up mode and CLS-
2
Selecting dual-light flash operation.
Press and hold the [SEL](FUNC.) button for
approx. 2 seconds to toggle between "dual-light"
and "triple-light" close-up flash operations.
• "Dual-light" is preset when shipped from the factory.
3
Setting the flash mode on the SU-800.
Press the [MODE] button to set the flash mode to
TTL or M (manual).
• "TTL" is preset when shipped from the factory.
• The same flash mode is set for both Groups A and B.
A B ON/OFF
4
Setting the SB-R200 to fire or cancel.
Press the [A
ON/OFF
canceled for group A or B.
• The flash-canceled group name disappears.
• In dual-light close-up flash operation, you cannot
LOCK
• Once set to flash canceled mode, flash output-level
• Even if the flash mode is set to flash canceled, flash
SB-R200 are on.
compatible camera indicators are correctly displayed
on the SU-800
B] select button to set flash firing/
cancel flash firing for Groups A and B.
ratio in TTL mode becomes invalid, while the flash
output level compensation values are retained.
output level compensation values in the M (manual)
mode are retained.