Uniden DSS2465 Quick Start Manual page 38

UP308BH (DSS2465) ENG OM 1/14/05
If you make a mistake while entering a name
Use
Press the DELETE soft key to erase the wrong character, then enter the correct
character. To delete all characters, press and hold the DELETE soft key.
If the next character
uses the same number
For example, to enter Movies:
key, you must press
1) When the phone is in the standby mode, recall the "Phonebook" menu by
to move the
cursor over. Otherwise
following steps 1-2 in "Storing Phone Numbers, Names, Distinctive Rings, and
the next time you
Speed Dial" on page 29.
press the number key,
it changes the
2) Press the STORE soft key, "Store/Edit Name" appears.
character that was
previously set. 3) Press 6 once to select "M", then press
4) Press 6 six times to select "o".
5) Press 8 six times to select "v".
6) Press 4 six times to select "i".
7) Press 3 five times to select "e".
8) Press 7 eight times to select "s".
9) When finished, press the OK soft key.
To continue to store the telephone number, proceed to step 6 on page 30.
[ 32 ]
11:46 AM Page 32
or to move the cursor to the incorrect character.
to move the cursor to the right.
Get other manuals https://www.bkmanuals.com