Table of Contents
Advertisement
BASIC OPERATIONS-confinued
_ _ _ _
22
Connect the sync
• cord
@
to the
camera
.
Remove the dust-proof plastic cap
from the sync cord 's camera plug
(silver).
Insert the camera plug in
the camera's flash socket after
aligning the white
index
on the flash
sync socket with the red
index
on
the camera plug
.
When the camera
plug is
inserted,
turn
its
locking ring
clockwise as far as it will go to
secure the plug
.
24
Connect the sync
• cord to the 58-102.
Remove the dust-proof plastic cap
from the sync cord's speedlight
plug
(black).
Insert the speedlight
plug into the synchro socket after
aligning the synchro socket
index
CD
with the red
index
on the
speed-
light plug. When the speedlight plug
is
inserted,
turn its locking ring
clockwise as far as it will go to
secure the plug
.
12
Check the a·ring
: Before
con-
necting the camera plug to the
camera
,
examine the plug
's
O-ring
for dust and scratches and be sure
it is properly seated and
lubricated.
o
Do
not
apply excessive force to the
sync
cord's camera
plug,
and
avoid
twisting the
cord as much as
possible.
Check the a·ring:
Before connect-
ing the speed light plug to the
speedlight,
examine the
plug 's
O-ring for dust and scratches and
be sure it is properly seated and
lubricated.
•
To keep the
sync
cord out
of
the way while
shooting,
attach
it to
the hook
of
the
cord
fastening hanger.
23
Remove the synchro
• socket cover
®.
Turn the synchro socket cover
counterclockwise
,
then pull it
up.
25
Confirm the position
• of the flash head.
Confirm that the arm positioning
screw is aligned with the arm posi-
tioning
index,
the flash head posi-
tioning
index is
aligned with the
"
normal
"
position mark on the flash
head positioning
scale,
and the
flash head is facing in the same
direction as the camera 's
lens.
If
the arm positioning screw is not
properly
aligned,
loosen the joint
lever to reposition it. If the flash
head positioning
index
is not pro
-
perly aligned loosen the jOint knob
to reposition it.
oSee page
18
for
information
about position-
ing
the flash head for
close-up shooting
within approximately 1 m (3.3
fO.
Advertisement
Table of Contents
