Pecron E1000 PRO - Portable Power Station Manual

FUNCTION INTRODUCTION

1. LCD Display
2. DC 12V~18V Charging Port
3. DC 32V~95V Charging Port
4. AC 100V~120V Output
5. Wireless Charger
6. DC 12V/USB/ Wireless Switch
7. AC 100V~120V Switch
8. DC12V Auxiliary Output
9. DC12V(5525)Output
10. USB-A/USB-C Ports

SPECIFICATIONS

OUTPUT SPECS

AC Out*3	USB-A*2	USB-C*2	Cigar Port*1	DC 5525 Output*2	Wireless Charger*1
Pure sine wave 100V~120V Rated 1200W	(5V,9V,12V, Max 18W)*2	(5V,9V,12V, Max 18W)*1 (5V,9V,12V,20V, Max 100W)*1	DC 12V10A	DC 12V5A	Max 15W

INPUT SPECS

(Do not support charging from both input ports at the same time.)

HOW TO USE THE E1000 PRO

press and hold to turn on / off DC / USB / Wireless Charger
press and hold to turn on / off AC ( Please turn off the AC function if there is no AC load on the unit)

LCD SMART DISPLAY

Temperature Alarm Icon
E1000 PRO can power your devices at temperatures ranging from -20~45℃. If your working temperature is more than 45℃, the temperature alarm indicator will flash, the unit may stop working.

AC Overload Alarm Icon
E1000 PRO can power most devices with consumption power less than 1200 watts.
If your devices exceed 1200W, The AC overload alarm indicator will flash, The unit will stop supplying power.

PACKING LIST

RECHARGE TIME

Wall Charger	Electric Generator	Car Charger
Around 3.5Hours	Around 3.5Hours	Around 12 Hours

SOLAR CHARGE TIME

The solar charging time depends on weather conditions. E1000 PRO has a built-in MPPT charge controller that supports 32~95V, 15A PV charging up to 400W.

USING SOLAR PANELS TO CHARGE THE E1000 PRO

1. DC5521 Charging Port: PV/DC 12V~18V, 100W maximum; VOC(open circuit voltage) of solar panel must be less than 25V;
2. GX16MF-5 Charging Port: PV(operating voltage) range 32V~95V, 400W maximum; VOC(open circuit voltage) of solar panel/array must be less than 95V, otherwise, it will damage the unit! Do not wire more than two 36V solar panels in series. (36V stands for Vmp, the operating voltage, of the solar panel)
3. If you have any questions, feel free to contact us: support@pecron.com
   (Do not support charging from both input ports at the same time.)

FAQS

Q1: What kind of battery is used in E1000 PRO? How long it can last?
A: E1000 PRO utilizes high quality UL certified automotive battery cell, it can retain 80% efficiency at 1000 complete charge cycles.

Q2: What devices can E1000 PRO power?
A: The AC output ports can power appliances which use less than 1200 watts of electricity. However, inductive types of loads such as freezer, fridge, compressor, motor require a much higher power to start (approx. 3-7 time lager than its rated power)
The DC output ports can supply a maximum DC power of 120W(12V@10A).

Q3: Can the E1000 PRO be used as UPS?
A: The UPS function is not supported.

Q4: How to calculate the E1000 PRO running time?
A: Running Time=Total Capacity(1000Wh) * 0.85 (Depth of Discharge)/Loading Power(Watts)

Q5: Can I use the E1000 PRO indoors and charge the E1000 PRO indoors?
A: Yes, the E1000 PRO is safe to use indoors.

Q6: Does E1000 PRO have built-in MPPT charge controller?
A: Yes, E1000 PRO has a built-in MPPT charge controller, which supports 12V-18V(max 100W) or 32V-95V(max 400W) PV input.

Q7: What kind of maintenance does E1000 PRO require?
A: Charging E1000 PRO in time when the battery running low; And please charge it at least once in every six months even if it is not being used.

Q8: How to store the E1000 PRO?
A: Do not store, charge or use E1000 PRO near heat sources, or in an area exposed to flammable or corrosive gas;
Do not immerse in water. Keep away from liquids and store it in a cool and dry place.

DISCLAIMER

Please read the user manual thoroughly before using this product, and keep this manual in a safe place for future reference. Failure to follow the instructions for proper set up, use, and care for the device can increase the risk of serious personal injury, death, or property damage. Once you use this device, you are deemed to have understood, recognized and accepted all terms and contents of this document. The user shall be responsible for his own actions and all consequences arising from failure to use the device in accordance with the "User Manual", or as authorized in Pecron's current product literature. In compliance with laws and regulations, Pecron reserves all rights for final explanation, and to change these terms and conditions at any time without prior notice. In the event that any revisions are made, the revised terms and conditions shall be posted on our website immediately, please visit our website to inform yourself of any changes.

WARNING

1. Do not place the device near heat source, such as a fire or a heating furnace.
2. Do not immerse in any liquid, or expose the unit to rain or wet conditions.
3. Do not use the battery in a strong static electricity or electromagnetic environment.
4. Do not disassemble or puncture the product with sharp objects in any way.
5. Short circuits can be caused by: vermin or pests chewing through wires; water or other fluids coming into contact with electrical wiring.
6. It's prohibited to be used as car jump starter, only can be used to charge the car battery.
7. Do not use accessories or parts other than those provided by Pecron. Please visit our website www.pecron.com or reach our support team for a complete list of accessories and parts.
8. When using this product, please strictly follow the ambient temperature for use in the user manual. If the temperature is too high, the battery can potentially result in self-combustion and will burst into flames, which can cause widespread damage. If the temperature is too low, the performance of the battery will be seriously degraded, and it may even fail to meet the normal use requirements.
9. Do not stack heavy objects on this product.
10. Do not block the air vents during use, or leave the device in a non-ventilated or dusty space.
11. Please avoid impacts, fall off, and violent vibration. Please turn off the device immediately and stop using it in the event of major exterior impact. Please fasten the unit firmly during transportation to avoid vibration and impact.
12. In the event of immersing the device into the water accidentally, please place the unit in a safe open area and keep away from the unit until it is completely dry. The dried unit should not be reused and should be disposed of properly according to the local regulation. If the device catches fire, use the fire extinguishing equipment in the following recommended order: water or mist, sand, fire blanket, dry chemical, carbon dioxide fire extinguisher.
13. Please wipe it with a dry cloth to clean the surface of the device.
14. Please place this device with care to prevent the product from being damaged due to fall off. If the product is damaged due to fall off, please turn off the unit immediately and place it in an open area, keep away from combustibles and crowds, and dispose of in accordance with local laws and regulations.
15. Please store this device in a place out of reach of children and pets.

Documents / Resources

References

• PECRON: Portable Power Station & Best Solar Generator Kit

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Pecron E1000 PRO - Portable Power Station Manual