Pecron S1000, S1500 - Outdoor Portable Power Station Manual
  1. Manuals
  2. Brands
  3. Pecron Manuals
  4. Power Supply
  5. S1000
  6. User manual

Pecron S1000, S1500 - Outdoor Portable Power Station Manual

Also See for S1000:

Advertisement

Table of Contents
Contents
Pecron S1000, S1500 - Outdoor Portable Power Station Manual

Introduction

Pecron S1000/S1500 is a multi-use outdoor portable power station, it adopted three-dimensional spinel based lithium-ion battery made up of first-class EVE automotive-grade power cell guarantees it's great stability and longevity.

  • Pure Sine Wave output
  • DC output 12V10As USB*4 (QC3.0)
  • LCD Smart Display
  • Super Fast Charging
  • Support Three Ways Charging(AC charging, Car charging and Solar charging)

With 1,461.6Wh(1,028Wh) lithium-ion battery pack at its core and a built-in pure sine wave inverter, S1500(S1000) is capable of providing 1,500(1,000) watts power to run a wide range of appliances, such as mobile phones, refrigerator, juicer, projector, electric saw, or even your Tesla; It can be widely used in the area of mobile working, outdoor recreation, camping, rescuing, environment protection, emergency communication, power outage backup and so on.

Please read the user manual carefully before using, and keep the purchase receipt as a proof of purchase for any warranty claim.

Function Instruction

Function Instruction - Part 1

  1. Power Switch: Press the power switch to start the unit, the general information of the power station will be displayed within 2 seconds at 100% brightness; press the button one more time to decrease the brightness to 50%; Press and hold the button for 1 second to turn the unit off.
  2. DC Switch: Press and hold the DC switch for 1 second, the USB and 12V DC output ports will be activated, at the same time, the LCD screen shows the battery level, estimated discharging time(H), discharge(load) wattages, "DC OUT" symbol (shown as Picturel); Press the DC switch one more time to show the discharging voltage;
    Press and hold the DC switch for 1 second to deactivate the USB and DC output.
    Function Instruction - Part 2
    Picture 1
  3. AC Switch: Press and hold the AC switch for 1 second, the AC output will be activated, at the same time, the LCD screen shows battery level, AC discharge time(H), AC discharge(load) wattages, load percentage, "AC OUT" symbol; Press the AC switch once more time to show AC discharge voltage + PF value (shown as Picture 2).
    Press and hold the AC switch for 1 second to turn off the the AC output function.
    Function Instruction - Part 3
    Picture 2
    Function Instruction - Part 4
    Picture 3
  4. LCD smart display screen
  5. USB QC3.0: Turn on the DC Switch to use the USB function
    Function Instruction - Part 5
  6. Air Vent
  7. DC Output Port: 16MF two-prong aviation plug(1 is positive, 2 is negative), it can supply (12V 10A) power to it's connected devices when DC switch is turned on.
  8. DC Input Port: 16MF four-prong aviation plug(1&2 are positive, 3&4 are negative), charging the through this port when the battery is running now(29.4V 10A)
  9. AC Output Socket*2: When AC switch turned on, it can produce up to 1500(1000) wattages power to run your appliances.
  10. Air Vent

Product Information

NO. Model S1000 S1500
1 Rate Power 1000W 1500W
2 Peak Power 2000W 3000W
3 AC Output 220V/50Hz (Version) AC110V60Hz (Version) AC100V50Hz (Version)
4 Output Waveform Pure sine wave
5 DC Output DC 12V10A USB*4 (QC3.O)
5 Cell Type 18650-20P7S( 3.6V2.9Ah)
6 Battery Capacity 1028Wh(25.2V40.8Ah) 1461.6Wh(25.2V58Ah)
7 Battery Type Lithium-ion
9 Charging Time 5~6H(2~3H for pro version) 7~8H(3~4H for pro version)
10 Charging Voltage And Current DC29.4V9A Solar Panel 36V 20A( MAX )
11 Protection Function Over-voltage, low-voltage, over-temperature, overload, AC short circuit protection
12

Working

Temperature

0oc~45 oC (Charge)

-20oC~600C (Discharge)
13

Product

Dimension

 L352*W187*H260(mm)
14 Shell Material UL94-V0 PC+ABS
16 Net Weight 22.41bs(10.2kg) 251bs(11.6kg)

Working Conditions

NO. Test Project Specification Unit Remark
1 Working Temperature 0~45 oC
2 Storage Temperature -20~60 oC
3 Humidity 45%~85% RH
4 Cooling type Air-cooled Cooling≥450oC
5 Altitude <3000 m
6 Battery Life ≥25000 H

Technical Specifications

Specifications

Specifications

Protection Instructions

Protection Instructions - Part 1

NOTE: Once Over Load and AC Output self-protection is active, you need to restart the AC output function to use for AC ports.

Protection Instructions - Part 2
Protection Instructions - Part 3

Operating Instructions And Precautions

To ensure safety during the transportation, the power station is in low battery capacity status when you receive it, please charge the unit to full before using.
Please use Pecron original charger for, or 36V 200~300W solar panel for faster charging experience. Please disconnect the charger after the unit is fully charged.
Using third-party charger or adapter could result in product damage or even safety hazards.

Prior To Using

Precautions:

  1. Please make sure the input voltage and frequency fits into the unit
  2. Please make sure the appliance consumption power is below its rated power. It is suggested not to run devices at or over its 80% loading capacity for prolonged time
  • Fail to take the precautions could result in product failure.
  • You can get larger capacity and wattages power stations from www.pecron.com if S series does not meet your needs.

Remark: Some appliances require extra power to start up; In general, the starting power for inductive load equipments(e.g. motor, compressor, fluorescent lamps) is 3~8 times higher than its rated power. The BMS will activate the over-load protection and shut down all outputs if the total output exceeds its loading capacity.

  1. The BMS will be activated and shut down the outputs when the following situations happen
  1. When the total loading power exceeds the power station rated power.
  2. Short circuit in AC output
  3. The temperature of the battery pack is too high
  4. The voltage of the battery pack is too low

How To Use AC:

Step 1: Press "ON/OFF" to start the power station; Press and hold "AC ON/OFF" for 1 second to activate AC output function
How To Use AC - Step 1

Step 2: Check your device working wattage and make sure it does not exceed the rated power of the unit(1500W).

Step 3: Plug your device into the AC outlets before turn it on.
How To Use AC - Step 2

Step 4: Press the "ON/OFF" button to shut down the unit after finishing using.

Step 5: Please charge the power station on time when the battery is running low.

How To Charge

You can charge your Pecron through the following methods:

  1. Use Pecron official charger to charge your Pecron from a standard wall outlet.
    How To Charge
  2. Use 29.4-40V solar panel to charge: S1000/S1500 is universally compatible with third party (MC4) solar panels. For any 18V panels, you will need to get two of them in series connection(18V*2=36V) to charge S1500, this including Pecron Aurora 100
  3. Use car adapter to charge: You can use the 4 in 1 Aurora adapter to charge your Pecron from your vehicle cigarette port. Make sure to start your vehicle before charging.

warning Notes:

  1. S series standard power adapter can be used for Pecron S series only, please don't use it to charge other device.
  2. When charging your Pecron through PV input(solar or vehicle), make sure to connect the outlet with correct positive and negative pins.
  3. Please make sure to charge your Pecron at least once for every six months if it is left unused for a prolonged time.

How To Use 12V DC and USB ports


➔ Two-prong aviation DC outlet: Press and hold the DC switch for 1 second to activate/deactivate the DC output function, this outlet can produce up to 12V, 10A(120W) power to run your DC devices


➔ 4 x USB QC3.0: Activate the USB function by pressing and holding the DC switch for 1 second(Same as the DC outlet).

Product Testing

Conditional Testing

No. Test Project Test Conditions Check Item
1 High-altitude Test
  1. Pressure ≤11.6Kpa, Temp. =20±5oC
  1. Overall performance
  2. Battery
2 Temperature Test
  1. Temperature between 40±2 and 75±2 oC
  1. Overall performance
  2. Battery
3 Vibration Test

Amplitude: 1.52mm

Frequency range: 5Hz~10Hz
Speed: About 10 m2 / S3,
Frequency range: 0Hz~200Hz
Speed: About 3 m2 / S3,
Frequency range: 200Hz~500Hz
Speed: About 1 m2 / S3,

The duration of each vibration test is 20 minutes. It vibrates from the directions of the random X, Y and Z axes.
LCD reads correctly; No loosen components or abnormal noise detected; No damage to either the inside or outside of the unit;
  1. Overall performance
  2. Battery
  3. LCD display

Functional Testing

  1. Discharging test with load
    Functional Testing - Step 1
  2. Charging test
    Functional Testing - Step 2
  3. 12V DC output test
    Functional Testing - Step 3
  4. USB output test
    Functional Testing - Step 4

Trouble Shooting

Issues Potential Causes Solutions
LCD display is unresponsive when pressing any switches Interior battery self-protection Charge the unit
No AC output even AC function is activated Over heat Disconnect the load and wait until it cooling down
Over load Reduce the load
Low voltage Charge the unit
USB ports not functional DC output function is inactive Press and hold the DC switch for 1 second
The battery drains too fast AC switch is on when using DC ports Turn off AC switch when there is no AC load
Can't be (fully) charged through solar panel
  1. Incompatible solar panel
  2. Insufficient Sunlight
 Choose other solar panels Ensure that the charging voltage is between 29.4-40V.

Package List

NO. Package Content Quantity
1 S 1500 Power Station 1
2 Power Adapter 1
3 Power Cord 1
4 DC Output 4 in 1 Cable 1
5 Solar Cable + accessory bag 1
6 Car charger (optional) 1
7 User Manual And Warranty Card 1

https://www.pecron.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Pecron S1000, S1500 - Outdoor Portable Power Station Manual

Advertisement

Need Assistance?

Do you have a question about the S1000 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Related Manuals for Pecron S1000

Save Article as PDF

Table of Contents