Advertisement
Thanks for choosing PECRON Q series portable power station. Q series features with an easy-maneuver robust design, large battery capacity and high rated power. This back-up power source can provide you with easy access to power in the fields of mobile working, outdoor recreation, off-grid living, emergency rescuing and etc.
Main functions for Q2000S/Q3000S:
Q2000S/Q3000S HIGHLIGHTS |
110V/60Hz pure sine wave output |
Three-way to recharge |
12V10A DC output |
QC3.0- dual USB output |
Intelligent LCD display |
Please read the manual carefully before using the unit, and keep the purchase receipt as a proof of purchase for any warranty claim.
Model | Q2000S | Q3000S |
AC output voltage | AC 110V60Hz | |
Output waveform | AC pure sine wave | |
Rated power | 2000W | |
Peak power | 4000W | |
Battery capacity | 1885.52Wh(25.9V72.8Ah) | 3024Wh(25.2V120Ah) |
Battery type | Lithium-ion battery | |
Charging voltage and current | DC29.4V9A DC29.4~40V20A(Solar charge) | |
Charging time | 8~9H | 11~12H |
DC output | DC12V10A QC3.0(5V2A 9~12V1.5A) | |
Temp | 0℃~45℃(Charge),-20℃~45℃(Discharge) | |
Protection | Over-voltage, over temperature overload, short-circuit | |
Product color | Black +yellow | |
Dimension(cm) | L40*W24.5*H27.2 | |
Weight | 52.9lbs(24kg) | 62.8lbs(28.5kg) |
Please read the main functions carefully before using the power unit to avoid unnecessary damage.
When you leave the unit unused for a long period of time, make sure to charge it every 6 months.
If the power station has been kept idle for a long time, please charge it to full even if the battery level reads 100%.
NO. | Q2000S/Q3000S accessories | Quantity |
1 | Charging adapter | 1 |
2 | Solar charging cable | 1 |
3 | User manual and warranty card | 1 |
4 | Accessories Bag | 1 |
NO. | Functions of each part |
1 | DC cigar outlet:12V output with constant voltage; max current is 10A. |
2 | QC3.0*2: supply power to DC equipment (DC 5V2A 9V~12V1.5A) |
3 | Smart display: showing the battery level, percentage, loading power and remaining using hours. |
4 | DC/Power switch: Press this button to activate the DC function. At the same time, the display will show the battery level, remaining hous, voltage etc. |
5 | DC charging ports (1, 2 is positive, 3, 4 is negative):charging voltage range of this port is DC 29.4V~40V20A(solar charge) |
6 | AC outputs: Supply 110V/60Hz power to run your AC appliances |
7 | AC switch: Press this button to activate the AC function |
Dry | Use and store the unit only in a cool and dry environment |
Temperature | 0℃~45℃ for charging -20℃~45℃ for discharging |
Ventilation | Keep the air vents at least 20cm away from any objects to prevent improper air flow |
Safety | Do not store, charge or use the unit in an area exposed to flammable or corrosive gas |
Please use Pecron original power adapter to charge, and do not leave the unit unattended while using. It is recommended to charge the power station without load to prevent excessive heating.
When the display shows 100% charged, the charger will still delivery a small voltage to the power station through trickle charge until the indicator turns green.
Q2000S/Q3000S portable power station support any devices with working power under its rated power. However, some appliances require extra power to start up; In general, the starting power for inductive load equipments(e.g. motor, compressor, drill, fluorescent lamps) is 3~8 times higher than its rated power. The BMS will activate the over-load protection and shut down all outputs if the total output exceeds its working power.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Pecron Q2000S, Q3000S - Portable Power Station Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Q2000S that isn't answered in the manual? Leave your question here.