Related Manuals for Pecron EP3000-48V
Summary of Contents for Pecron EP3000-48V
- Page 1 EP3000-48V EP3000-48V 3072Wh USER MANUAL Please read the user manual thoroughly before using support@pecron.com...
-
Page 2: Function Introduction
① ⑤ ⑨ LED Capacity Indicator Power Display Switch DC Switch ② ⑥ ⑩ Indicator Under Cascade Status DC12V XT60 Output DC 12V~95V Charging Port ③ ⑦ Serial number knob USB-C Ports ④ ⑧ Battery Expansion Port USB-A Ports support@pecron.com... -
Page 3: Specifications
SPECIFICATIONS EP3000-48V 3072Wh Capacity Protections Temperature Dimension Battery Type Net Weight Over-Voltage, L17.3*W12.2*H7.8 in Around 57lb 3072Wh LiFePO4 Battery 0℃~45℃/32°F~113°F Overheat, L441*W312*H200 (51.2V60Ah) Retain 80%+ (Charging) Around 26kg Overload, Original Capacity -20℃~45℃/-4°F~113°F Short-Circuit, At 3500 Cycles (Discharging) Self-Recovery OUTPUT SPECS... -
Page 4: Packing List
5521 Connector *1 GX16MF-5 connector *1 12V Alligator Clips *1 Corner protector *6 Metal connecting piece *6 Screws *6 HOW TO USE THE EP3000-48V 100% Light press to show battery capacity EXTRA BATTERY PORT 1 EXTRA BATTERY PORT 2 support@pecron.com... - Page 5 If the operating temperature is not within this range, it will fail to work. HOW TO USE THE EP3000-48V IN CASCADE WITH THE HOST 1：Before use, make sure the EP3000-48V power pack and the host have similar battery levels, with a difference of no more than 10%.
- Page 6 CASCADE PROCESS NOTES 1：When cascading multiple EP3000-48V units, it is important to maintain the uniqueness of the serial numbers. 2：Without connecting to the host, EP3000-48V units cannot be connected or activated. 3：After completing the cascade connection, when using EP3000-48V units, the charging and discharging power may not be displayed on the host screen, but the host will calculate their battery levels.
- Page 7 3：Install the protective corners in the following order: align the side with the positioning structure first, then snap the front ② side into place. Install them one by one until they are properly EP3000-48V 3072Wh positioned. ① EP3000-48V 3072Wh support@pecron.com...
- Page 8 EP3000-48V 3072Wh (The protective corners in the middle of the power packs are for aesthetic purposes only and do not provide structural strength.) EP3000-48V 3072Wh HOW TO CHARGE THE EP3000-48V BATTERY PACK BY VEHICL DC ON/OFF DC INPUT 12V-30A PD 100W...
- Page 9 Recommended 19~20 Hours 10~11 Hours Note: The above data comes from PECRON’ s laboratory. Actual charging time depends on the weather conditions. USING SOLAR PANELS TO CHARGE THE EP3000-48V GX16MF-5 Charging Port: PV (operating voltage) range 12V~95V, 400W maximum; VOC (open circuit voltage) of solar panel/array must be less than 95V, otherwise, it will damage the unit! Do not wire more than two 36V solar panels in series, or more than four 18V solar panels in series.
- Page 10 MC4 Solar Charging Cable*1 ※ It is recommended to choose PECRON solar panels for optimal user experience! The VOC of a single solar panel should be less than 95V, and the VMP should be greater than 12V. Charging EP3000-48V with two solar panels in series MC4 Solar Charging Cable*1 ※...
- Page 11 A：Currently EP3000-48V power pack can be cascaded to machines with MJ32 cascade port. Q3：After the EP3000-48V power packs are cascaded, can the EP3000-48V power packs be used to charge or discharge? A：Yes, but the charging and discharging power cannot be displayed on the host separately, the current and voltage of each battery pack can be viewed through the APP.
- Page 12 6、 It's prohibited to be used as car jump starter, only can be used to charge the car battery. 7、 Do not use accessories or parts other than those provided by PECRON. Please visit our website www.pecron.com or reach our support team for a complete list of accessories and parts.
- Page 13 2、If the battery cannot be completely discharged due to the failure of the product itself, please do not dispose of the battery directly in the battery recycling box, and contact a professional battery recycling company for further disposal. 3、The battery will not be able to start after being over-discharged, please dispose of it according to the principle of disposal. support@pecron.com...
- Page 14 EXCLUSIONS PECRON’ s warranty does not apply to： Misused, abused, modified, damaged by accident, or used for anything other than normal consumer use as authorized in PECRON’ s current product literature. CUSTOMER SUPPORT：support@pecron.com WEBSITE：www.pecron.com PECRON.LLC support@pecron.com...
- Page 16 POWER IT POSSIBLE www.pecron.com support@pecron.com...