Table of Contents
Advertisement
6.
Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
32).
Figure 32
7.
Start the engine and drive to a flat area.
8.
Check the oil level again.
Changing the Engine-Oil Filter
1.
Drain the oil from the engine; refer to
the Engine Oil (page
2.
Change the engine-oil filter
Note:
You can use a ratchet extension in the
hole shown in
Figure 34
wrench.
(Figure
Changing
28).
(Figure
33).
to engage an oil-filter
g194610
Note:
Ensure that the oil-filter gasket touches
the engine, and then turn the oil filter an extra
3/4 turn.
3.
Fill the crankcase with the proper type of new
oil; refer to
29
Figure 33
Figure 34
Engine Oil Specifications (page
g027477
g261616
27).
Advertisement
Table of Contents
