Toro 22984HD Operator's Manual page 28

Figure 30
Changing the Engine Oil
1. Start the engine and let it run 5 minutes. This
warms the oil so it drains better.
2. Park the machine so that the drain side is slightly
lower than the opposite side to ensure that the
oil drains completely.
3. Lower the boom and engage the parking brake.
4. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
5. Change the oil
g194611
28
(Figure 31).
Figure 31
g261614
g032754