It is normal that the monitor slightly shakes while you adjust the viewing angle.
2.4
Connecting the cables
Connect the cables as the following instructions:
VA279HA / VA279HAE
•. To.connect.the.power.cord: Connect one end of the power cord securely to
the monitor's AC input port, the other end to a power outlet.
•. To.connect.the.VGA/HDMI.cable:
a.
Plug one end of the VGA/HDMI cable to the monitor's VGA/HDMI jack.
b.
Connect the other end of the VGA/HDMI cable to your computer's VGA/
HDMI jack.
c.
Tighten the two screws to secure the VGA connector.
2-4
130mm
-5°~+35°
VA279HAL / VA279HAEL
0°
90°
Chapter 2: Setup