Overexposure
Underexposure
Check point
2
Set the shutter speed (30-1/2000
sec.) with the Command Dial.
3
Compose picture, confirm focus
indicator. and shoot.
•
When the subject is too dark or too
bright,
one
of the following warning indications will appear
in the viewfinder and LCD panel.
(Over-
or
underexposure value is indicated with the
electronic analog exposure display in the
viewfinder.)
•
H
::
Select
higher
shutter speed. If the
warning indication still remains
on,
use
an NO filter
(optional).
•
lo
:
Select slower shutter speed
.
If the
warning indication still remains
on,
use
the Speed light. When the Speed
light
is
used,
fastest shutter speed is limited to
1/90 sec.
•
If the subject is too dark or backlit, the flash
recommended indication
~
blinks in the
viewfinder when you lightly press the shutter
release
button.
Use
the Speedlight (page
80/91).
• If -
- (Long
Time
exposure) is selected in Manual exposure mode and the exposure
mode is changed to Shutter-Priority Auto without cancelling - -
,
- - blinks and the
shutter
locks.
To shoot in Shutter-Priority
Auto exposure
mode,
select shutter speed
other than - -
by
rotating the Command Dial.
57
I
I