Cruise Control Set Indicator Light - Subaru Outback 2006 Manual

2.5-liter non-turbo models
The cruise control indicator light comes on
when the ignition switch is turned to the
"ON" position and goes out after approxi-
mately 3 seconds.
The light comes on when the "CRUISE"
main switch is pressed.
NOTE
. If you press the "CRUISE" main
switch button while turning the ignition
switch "ON", the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate the cruise control function,
turn the ignition switch back to the
"Acc" or "LOCK" position, and then
turn it again to the "ON" position.
. If this indicator light and the CHECK
ENGINE warning light/malfunction in-
dicator light flash simultaneously dur-
ing driving, have the vehicle checked
by your nearest SUBARU dealer.
& Cruise control set indicator
light
Turbo and 3.0-liter models
Black plate (295,1)
Starting and operating
S07AQ06
2.5-liter non-turbo models
The cruise control set indicator light
comes on when the ignition switch is
turned to the "ON" position and goes out
after approximately 3 seconds.
The light comes on when vehicle speed
has been set.
北米Model "A2440BE-A" EDITED: 2006/ 12/ 6
7-49
7