Subaru Outback 2006 Manual page 134

tial illumination when regular illumina-
tion (for driving) has begun.
!
Date/Time settings
The following items can be set or regis-
tered in the "Date/Time" setting menu.
. Present date & time
. Birthday
. Anniversary
NOTE
To enter "Birthday" and "Anniversary",
"Present date & time" must be set.
To enter the "Date/Time" setting menu,
take the following steps.
1. Within 12 seconds after turning on the
ignition switch, press the " /SET" switch
for at least 2 seconds.
2. T h e d i s p l a y s h o w s " M E T E R
SETTING", and then changes to the
setting screen.
S03BE1202
3. When the setting screen is displayed,
select "Date/Time" by pressing the "
" " switch. And press the " /SET" switch
to enter the "Date/Time" settings.
After the Date/Time setting screen has
been displayed, the display can be
switched as shown below by pressing
the " " or " " switch.
Black plate (137,1)
Instruments and controls
Refer to the following procedure for further
steps.
! Present date & time
" or
1. Press " " or " " until "Present date &
time" is displayed, and press " /SET".
– CONTINUED –
北米Model "A2440BE-A" EDITED: 2006/ 12/ 6
3-17
3
S03BE120201