Subaru Outback 2006 Manual page 257

!
P (Park)
This position is for parking the vehicle and
starting the engine.
In this position, the transmission is me-
chanically locked to prevent the vehicle
from rolling freely.
When you park the vehicle, first set the
parking brake fully, then shift into the "P"
position. Do not hold the vehicle with only
the transmission.
To shift the selector lever from the "P" to
any other position, you should depress the
brake pedal fully then move the selector
lever. This prevents the vehicle from
lurching when it is started.
!
R (Reverse)
This position is for backing the vehicle.
To shift from the "N" to "R" position, stop
the vehicle completely then move the
lever to the "R" position.
!
N (Neutral)
This position is for restarting a stalled
engine.
In this position the wheels and transmis-
sion are not locked. In this position, the
transmission is neutral; the vehicle will roll
freely, even on the slightest incline unless
the parking brake or foot brake is on.
Avoid coasting with the transmission
neutral.
S07AG0101
During coasting, there is no engine brak-
ing effect.
NOTE
If the selector lever is in the "N"
position when you stop the engine for
parking, you may not subsequently be
able to move it to the "R" and "P"
positions. If this happens, turn the
ignition switch to the "ON" position.
You will then be able to move the
selector lever to the "P" position.
WARNING
Do not drive the vehicle with the
selector lever in the "N" (neutral)
S07AG0102
position. Engine braking has no
effect in this condition and the risk
of an accident is consequently in-
creased.
!
D (Drive)
S07AG0103
This position is for normal driving.
The transmission automatically shifts into
a suitable gear from 1st to 4th according to
the vehicle speed and the acceleration
you require.
When more acceleration is required in this
position, press the accelerator pedal fully
Black plate (265,1)
Starting and operating
to the floor and hold that position. The
transmission will automatically downshift
to 3rd, 2nd or 1st gear. When you release
the pedal, the transmission will return to
the original gear position.
To use the "SPORT" mode, move the lever
from this position into the manual gate. To
use the manual mode, move the lever
from this position into the manual gate
then move it toward the "+" and "−" ends.
! While climbing a grade
When driving up a hill, undesired upshift to
4th gear is prevented from taking place
when the accelerator is released. This
minimizes the chance of subsequent
downshifting to a lower gear when accel-
erating again. This prevents repeated
upshifting and downshifting resulting in a
smoother operation of the vehicle.
NOTE
The transmission may downshift to 2nd
or 1st gear, depending on the way the
accelerator pedal is pressed to accel-
S07AG0104
erate the vehicle again.
! While going down a hill
When you are descending a hill or any
other slope while braking with the
"SPORT" mode selected, the transmission
may downshift to 3rd or 2nd gear depend-
ing on how hard you depress the brake
北米Model "A2440BE-A" EDITED: 2006/ 12/ 6
7-19
S07AG010401
7
S07AG010402
– CONTINUED –