Using Non-Dx-Coded Film; Film Rewind Crank-To Rewind Film Manually - Nikon F5 Instruction Manual

USING NON-DX CODED FILM
With non-DX coded film, rotate the Main-Command Dial while
pressing the (film speed) button to set film's ISO number in
the rear LCD panel. The usable range for manual film speed
setting is ISO 6 to 6400 in 1/3 steps.
• If DX-coded film is loaded but manual film speed setting is
selected, camera gives priority to the manually set ISO
number.
FILM REWIND CRANK—
manually
1 To rewind film manually, press the film rewind button 1
then lift the film rewind crank and turn in the direction of
arrow until the film leader is rewound completely back into the
cartridge.
Turn the film rewind crank a few times more after the tension is
gone.
• Frame counter counts backward when film is rewound manu-
ally with the meter on.
• Do not press the shutter release button until the film leader is
rewound completely back into the cartridge. Doing so may
damage the shutter curtain.
To rewind film
,
97