Installing Batteries - Nikon F5 Instruction Manual

INSTALLING BATTERIES

Before installing batteries:
• Make sure the power switch is set
at OFF position.
• Use AA-type alkaline or lithium
batteries, or optional Ni-MH
Battery Unit MN-30 with the F5.
• When installing/replacing batteries,
always read "NOTES ON BATTER-
IES", page 154.
3 Install eight AA-type batteries with
the "+" and "–" terminals positioned
as shown inside the holder.
CAUTION: When carrying the battery holder MS-30 removed from the camera
body, remove its batteries or install it in a case to avoid possible short-circuit
caused by contacts with other metal objects.
1 Pull out and turn battery holder
release knob as shown.
4 Return battery holder MS-30 to
battery chamber.
2 Remove battery holder MS-30.
5 Turn battery holder release knob
clockwise until it stops.
• To install Ni-MH Battery Unit MN-30,
follow steps 1-2 and 4-5.
19