Nikon COOLPIX P510 Reference Manual page 67

y M k Close-up
Use this mode to photograph flowers, insects, and other small
objects at close range.
Select Noise reduction burst or Single shot on the screen
that is displayed when k Close-up scene mode is selected.
• Noise reduction burst: This setting enables you to shoot a sharp picture with a
minimum of noise.
- The x icon is displayed on the shooting screen.
- When the shutter-release button is pressed all the way, pictures are shot continuously,
and the camera combines these pictures to save a single picture.
- Once the shutter-release button is pressed all the way, hold the camera steady without
moving it until a still picture is displayed. After taking a picture, do not turn the camera
off before the monitor switches to the shooting screen.
- If the subject moves or there is a significant camera shake during continuous shooting,
the image may be distorted, overlapped, or blurred.
- The angle of view (image area) seen in the saved image will be narrower than that seen
on the monitor at the time of shooting.
• Single shot (default setting): Records pictures with emphasized outlines and contrast.
- When the shutter-release button is pressed all the way, one frame is taken.
• The focus mode (A72) setting is changed to p (macro close-up) and the camera
automatically zooms to the closest position to the subject where the camera can shoot.
• You can move the focus area that the camera focuses on. Press the k button and then
rotate the multi selector or press H, I, J, or K to move the focus area. To adjust the
following settings, press the k button to temporarily cancel focus area selection, and
then adjust each setting.
- Flash mode (when Single shot is selected)
- Self-timer
- Exposure compensation
• The camera focuses on the subject even when the shutter-release button is not pressed
halfway. You may hear the sound of the camera focusing.
Scene Mode (Shooting Suited to Scenes)
49