Saving A Frame From A Movie As A Still Picture; Deleting Unnecessary Movies - Nikon COOLPIX P500 User Manual

Movie Playback
B
Notes on Editing Movies
• Once a movie is created through editing, it cannot be used again for extracting a movie. To extract
another range, select and edit the original movie.
• Because the edited movies are extracted in 1-second units, they may vary slightly from the set start
point and end point. Sections shorter than two seconds cannot be extracted.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
D
More Information
See "File and Folder Names" (A215) for more information.

Saving a Frame from a Movie as a Still Picture

A frame from a recorded movie can be extracted and saved as a still picture (except
for movies recorded with p iFrame 540 (960×540)).
• Pause a movie and display the screen to be extracted
(A168).
• Choose H on the playback control with the multi
selector J or K and press the k button.
• When the confirmation dialog is displayed, choose
Yes and press the k button to save. To cancel the
saving, choose No.
• The still picture is saved with Normal as the image
quality. The image size is determined by the type
(resolution) (A162, 164, 165) of the original movie.
B
Note on Saving a Still Picture
A black frame appears around the picture saved with s (320×240) during playback.

Deleting Unnecessary Movies

Press the l button when a movie is selected in full-frame
playback mode (A34) or thumbnail playback mode
(A115) to display the confirmation dialog for deletion.
See "Deleting Unnecessary Images" (A35) for more
information.
170
7m42s 7m42s 7m42s
Copy this frame as a still image?
Yes
No
Erase 1 image?
Yes
No