Saving A Frame From A Movie As A Still Picture; Deleting Unnecessary Movies - Nikon COOLPIX P7000 User Manual

B
Notes on Editing Movies
• Once a movie is created through editing, it cannot be used again for extracting a movie. To extract
another range, select and edit the original movie.
• Because the edited movies are extracted in 1-second units, they may vary slightly from the set start
point and end point. Sections shorter than two seconds cannot be extracted.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
D
More Information
See "File and Folder Names" (A203) for more information.

Saving a Frame from a Movie as a Still Picture

A screen from a shot movie can be extracted and saved as a still picture.
• Pause a movie and display the screen to be extracted
(A151).
• Choose H on the playback control with the rotary
multi selector J or K and press the k button.
• When the confirmation dialog is displayed, choose Yes
and press the k button to save. To cancel the saving,
choose No.
• The still picture is saved with Normal as the image
quality. The image size is determined by the type
(resolution) (A148) of the original movie.
- x HD 720p (1280×720) ➝ R 1280×720
- y VGA (640×480) ➝ S 640×480
- z QVGA (320×240) ➝ s 320×240
• When the picture is saved with s 320×240, it is displayed with a gray frame
during playback.

Deleting Unnecessary Movies

Press the l button when a movie is selected in full-frame
playback mode (A30) or thumbnail playback mode
(A116) to display the confirmation dialog for deletion.
Select Yes and press the k button to delete the movie,
or select No to exit without deleting the movie.
Movie Playback
7m42s 7m42s 7m42s
Copy this frame as a still image?
Yes
No
Erase 1 image?
Yes
No
153