Yamaha WOLVERINE R MAX 2021 Manual page 39

Odometer and tripmeters
1
1. Odometer/Tripmeter A/Tripmeter B/Service
tripmeter/Error code display
2. "SELECT" button
3. "RESET" button
The odometer shows the total distance trav-
eled by the vehicle.
The tripmeters show the distance traveled
since they were last reset. The tripmeters can
be used to record the distance traveled on a
single trip, or to estimate the distance that
can be traveled with a full tank of gas, etc. The
service tripmeter shows the distance traveled
since it was reset at the last maintenance.
2 3
Push the "SELECT" button to switch between
the odometer "ODO", the tripmeters "TRIP A"
and "TRIP B", and the service tripmeter "
in the following order:
ODO → TRIP A → TRIP B →
To reset a tripmeter, set the display to the
tripmeter you want to reset, then push the
"RESET" button until it is reset.
TIP
 The odometer will lock at 199999.
 The tripmeters will reset and continue
counting after 9999.9 is reached.
5-8
"
→ ODO
5