Error Messages - Nikon COOLPIX S1000pj User Manual

Error Messages

The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
O (blinks)
B
N
Battery exhausted.
P
Battery temperature
high
Q (● blinks red)
P
Please wait for the
camera to finish
recording.
N
Memory card is write
protected.
P
This card cannot be
used.
P
This card cannot be
read.
P
Card is not formatted.
Format card?
No
Yes
152
Problem
Clock not set.
Battery running low.
Battery exhausted.
Battery temperature is
high.
Camera cannot focus.
Camera cannot perform
other operations until
recording is complete.
Write-protect switch is
in "lock" position.
Error accessing memory
card.
Memory card has not
been formatted for use
in this camera.
Solution
Set date and time.
Prepare to charge or replace
battery.
Charge or replace battery.
Turn off camera, and allow
battery to cool down before
resuming use. After 5 seconds,
this message will disappear,
the monitor will turn off, and
the power-on lamp and flash
lamp will blink rapidly. After
the lamps blink for three
minutes, the camera will turn
off automatically. Pressing the
power switch also turns off
the camera.
• Refocus.
• Use focus lock.
Wait until message clears
from display automatically
when recording is complete.
Slide write-protect switch to
"write" position.
• Use approved card.
• Check that connectors are
clean.
• Confirm that memory card
is correctly inserted.
Formatting deletes all data
stored on the memory card.
Be sure to select No and make
copies of any pictures you
wish to keep before
formatting the memory card.
Select Yes and press the k
button to format the memory
card.
A
121
14, 16
14, 16
17
26, 27
107
–
21
147
20
20
21