Attaching The Camera Strap - Nikon COOLPIX S1000pj User Manual

Replacing the Remote Control Battery
1
Push the tab in the
direction indicated
above.
4
Place a new 3V CR2025
lithium battery in the
battery holder. Be sure
that the "+" mark is
facing up.

Attaching the Camera Strap

1
The projector stand can be attached to the camera strap.
B
Note on the Projector Stand
Do not carry the camera by the projector stand attached to the camera strap. Should the projector
stand slip off the camera strap, the camera could fall.
2
Continue pushing the
tab and pull the battery
holder out as indicated
above.
5
Insert the battery holder
into the remote control.
2
Parts of the Camera
3
Remove the used 3V
CR2025 lithium battery.
3
7