Advertisement
Appearance
Each Deco has an LED that changes color according to its status, a WPS button, four 2.5 Gbps WAN/LAN ports, a USB 3.0 port, a power slot, and a
Reset button.
See the explanation below:
Tip: The product label can be found at the bottom of the product.
Pulse Yellow:
Deco is resetting.
Solid Yellow:
Deco is starting up.
Pulse Blue:
Deco is ready for setup.
Solid Blue:
Deco is setting up.
Pulse Green:
Deco is upgrading firmware.
Solid Green:
Deco is all set up and connected.
Pulse Red:
The satellite Deco is disconnected
from the main Deco.
Solid Red:
Deco has an issue.
WPS Button
Press this WPS button, and immediately press the WPS button
on your client device to start the WPS process.
4× 2.5 Gbps WAN/LAN Ports
For connecting Deco to your modem, the Ethernet outlet,
or for other internet services.
1× USB 3.0 Port
For connecting a USB storage device to Deco.
Power Slot
For connecting Deco to the power socket via the provided power adapter.
Reset Button
Press for 1 second and release to reset Deco to factory default settings. The light
changing from pulsing yellow to solid yellow indicated a successful reset.
2
Advertisement
