Table of Contents
Advertisement
EN 16
4.
LC9.3L LA
4.3.7
Local Control Board
Refer to
Figure 4-17
for details.
1. Unplug the connector on the IR & LED board that leads to
the Local Control board as described earlier.
2. Release the cable from its clamps/tape.
3. Release the clip on top of the unit [1] and take the unit out.
When defective, replace the whole unit.
4.3.8
LCD Panel
Refer to
Figure 4-18
for details.
1. Remove the Stand and IR/LED board [A] as earlier
described.
2. Remove the Speakers/Subwoofer [B] as earlier described.
3. Remove the PSU [C] and SSB [D] as earlier described.
4. Remove the Mains Switch [E] as earlier described.
2
F
2
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
2010-Mar-26
Mechanical Instructions
1
1
C
1
E
Figure 4-18 LCD Panel removal (based on 32" AL model)
1
Figure 4-17 Local Control board
5. Remove the Local Control board [F] as earlier described.
6. Remove the brackets [1].
7. Remove the clamps [2].
8. Remove the flare.
Now the LCD Panel can be lifted from the front cabinet.
1
1
B
1
1
1
1
A
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position.
•
Pay special attention not to damage the EMC foams in the
set. Ensure that EMC foams are mounted correctly.
18770_145_100216.eps
2
D
2
18970_112_100326.eps
100217
100326
Advertisement
Table of Contents
