Table of Contents
Advertisement
Viewing Pictures on TV
The EG-CP14 audio / video (A / V) cable included with the camera can be used
to connect the camera to a television or video-cassette recorder (VCR).
Choosing a Video Mode
The Video mode item in the setup menu offers a choice of NTSC and PAL
(
99). Be sure that the mode selected matches the standard used in the
video device.
1
Turn the camera off
Turn the camera off before connecting or disconnecting the A / V cable.
2
Connect the A / V cable
Open the interface connector cover as shown at
right and insert the black plug into the camera's
interface connector. Insert the yellow plug into the
video-in jack on the television or VCR. Connect the
white plug to the audio-in jack.
3
Tune the television to the video channel
If in doubt, consult the documentation for your television or VCR.
4
Turn the camera on
Press the
button for about a second to turn the camera on. The camera
monitor will remain off and the television will show the image normally
shown in the monitor.
PAL
If PAL is selected for Video mode and the camera connected to a video device, video
output will be suspended and the camera monitor or electronic viewfi nder will turn on
when the camera is in movie mode.
52
Hide quick links:
Advertisement
Table of Contents
