Table of Contents
Advertisement
Display
COMMUNICATIONS
ERROR
NO IMAGES ARE
MARKED FOR
TRANSFER
SYSTEM ERROR
LENS ERROR
Problem
• PictureProject is not run-
ning.
• USB cable disconnected
or memory card removed
while pictures are being
transferred to computer.
• USB option set incorrectly.
No pictures selected for
transfer when center of
multi selector pressed to
transfer pictures to com-
puter.
Error has occurred in cam-
era's internal circuitry.
Error has occurred during
lens operation.
Solution
• Start PictureProject before
pressing center of multi se-
lector.
• If error appears in computer
monitor, click OK to exit
PictureProject.
era off, reconnect cable or
replace memory card, then
turn camera on and transfer
pictures.
• Turn camera off and discon-
nect cable, then choose new
USB setting in camera setup
menu and reconnect cam-
era.
If error persists, use
Transfer button in Picture
Project to transfer pictures.
Disconnect camera and select
at least one picture for trans-
fer, then begin transfer again.
Turn camera off, unplug op-
tional AC adapter (if using),
remove and reinsert batteries,
and turn camera on. If error
persists, contact retailer or
Nikon representative.
Turn camera off and then on
again. If error persists, con-
tact retailer or Nikon repre-
sentative.
—
53–56
Turn cam-
53
53, 83
8–9
—
107
Hide quick links:
Advertisement
Table of Contents
