Af Fine Tune - Nikon D7000 User Manual

AF Fine Tune

Fine-tune focus for up to 12 lens types. AF tuning is not recommended in most
situations and may interfere with normal focus; use only when required.
Option
• On: Turn AF tuning on.
AF fine tune
(On/Off) • Off: Turn AF tuning off.
Tune AF for the current lens (CPU lenses only).
Press 1 or 3 to choose a value between +20 and
Saved value
–20. Values for up to 12 lens types can be stored.
Only one value can be stored for each type of lens.
Choose the AF tuning value used when no
Default previously saved value exists for the current lens
(CPU lenses only).
List previously saved AF tuning values. If a value exists for the current lens, it will
be shown with a V icon. To delete a lens from the list, highlight the desired lens
and press O. To change a lens identifier (for example, to choose an identifier that
is the same as the last two digits of the lens serial number to distinguish it from
other lenses of the same type in light of the fact that Saved value can be used
with only one lens of each type), highlight the desired lens and press 2.
List saved
values
The menu shown at right will be displayed; press 1 or 3
to choose an identifier and press J to save changes and
exit.
D
AF Tuning
The camera may be unable to focus at minimum range or at infinity when AF tuning is
applied.
D
Live View
Tuning is not applied to autofocus during in live view (0 49).
A
Saved Value
Only one value can be stored for each type of lens. If a teleconverter is used, separate values
can be stored for each combination of lens and teleconverter.
U
246
G button
Description
Move focal
point away
from camera.
Move focal
point toward
camera.
B Setup menu
Current
value
Previous
value