LCD Brightness
Press 1 or 3 to choose monitor brightness. Choose higher
values for increased brightness, lower values for reduced
brightness.
A
Live View
See page 49 for information on adjusting monitor brightness in live
view or during movie recording.
Video Mode
When connecting the camera to a television or VCR via the video connector, be sure
the camera video mode matches the device video standard (NTSC or PAL).
Flicker Reduction
Reduce flicker and banding when shooting under fluorescent or mercury-vapor
lighting during live view or movie recording. Choose a frequency which matches
that of the local AC power supply.
A
Flicker Reduction
If you are unsure as to the frequency of the local power supply, test both options and choose
the one that produces the best results. Flicker reduction may not produce the desired results
if the subject is very bright, in which case you should select mode A or M and choose a smaller
aperture (larger f-number) before starting live view. Note that flicker reduction is not
available when On is selected for Movie settings > Manual movie settings (0 60) in mode
M.
Time Zone and Date
Change time zones, set the camera clock, choose the date display order, and turn
daylight saving time on or off.
Option
Choose a time zone. The camera clock is automatically set to the time in
Time zone
the new time zone.
Set the camera clock (0 27). If the clock is not set, a blinking B icon will
Date and time
appear in the control panel.
Choose the order in which the day, month, and year are displayed.
Date format
Turn daylight saving time on or off. The camera clock will automatically be
Daylight saving time
advanced or set back one hour. The default setting is Off.
G button
G button
G button
G button
Description
B Setup menu
B Setup menu
B setup menu
B Setup menu
U
237