Table of Contents
Advertisement
Playback of applications' contents through
the product is not guaranteed. We
recommend playing contents downloaded
to the iPod.
If you have a problem using your iPod,
please visit www.apple.com/support/ipod
How to Link the Wireless transmitter
with the main unit
1.
Turn off your Home Cinema.
2.
Press the 4, 7, 6, 3 buttons on the remote
control in order.
•
The Power LED blinks once.
3.
Connect the iPod/iPhone to the Wireless
transmitter.
4.
Turn on the iPod/iPhone. Press the "ID SET"
button on the back of the Wireless
transmitter for 5 seconds. The link light on
the wireless transmitter blinks rapidly.
5.
Turn on your product.
•
To listen to music from your iPod/iPhone
over the product, press the
select "W. iPod" mode.
After you select "W. iPod" mode, turn the
•
volume of the product down to avoid hearing
damage.
You can control the speaker volume of the
•
iPod/iPhone with a volume wheel or a
volume bar.
When the iPod/iPhone is stopped or in a
•
power saving mode, the Wireless transmitter
enters Sleep Mode.
When iPod/iPhone is set to Deep Sleep
Mode, the Wireless transmitter turns off.
Operation status of the wireless
transmitter's LED
Display
LED ON
LED BLINK
(Long blink)
LED BLINK
(Short blink)
!
CAUTION
If you use a wireless device such as a laptop
computer, an AP, or Wifi , near the main home
cinema unit, an unstable operation error can
occur.
button to
Do not pair the SWA-5000 and iPod/iPhone at
the same time. If you pair them at the same
time, the iPod/iPhone and SWA-5000 may not
connect to the product.
The maximum transmission distance from the
product to the wireless transmitter is about
16.4 feet, but may vary depending on your
operation environment.
The audio signal may be weakened or even
lost where there is an obstacle such as a wall
or partition between the product and wireless
transmitter. You can also weaken or lose signal
if you move the wireless transmitter around.
Function
LINK
STANDBY
(Blue LED)
(Red LED)
Pairing
successfully
STANDBY
completed
Processing iPod/
LOW BATTERY
iPhone
Processing
Pairing failed
pairing
English
1
Advertisement
Table of Contents
