At Ta C H I N G Y O U R P H O N E - Promaster CHRONICLE User Manual

AT TA C H I N G Y O U R P H O N E

One of the Chronicle's premier features is its ability to switch from a camera to a
phone mount in seconds without the need for any additional accessories or tools.
Before attaching a phone, you must remove your camera from the
safety, please do not attempt to convert the Chronicle to phone mode with a camera
attached. The QR plate
to phone mode.
Begin by turning the
icons on this knob which show a camera and a phone. The phone icon should be at
the top position when this knob is turned to the proper position to accept a phone.
Next, lift up on the
padded jaw
out the
phone clamp uses springs to gently, yet securely hold your phone in between the
padded jaws. You can take ahold of the upper
assembly to see how these springs work.
If your phone is particularly large, or has a large case, the jaws of the phone clamp
can be widened. Do this by turning the
knob, notice the phone clamp opens wider.
Eventually (after about 7 1/2 turns of the
knob) the jaws will be at their widest point
and the knob will turn no further.
Using the springs already mentioned, you
can open the clamp fully to its widest
possible size (3 7/8" | 9.84 cm).
When you are finished using your phone and
wish to return the unit to camera mode,
reverse the steps above. Be sure to turn the
camera / phone knob
camera icon is at the top postion and the
8
should never be attached to the
camera / phone knob
top platform
of the ball head. It will lift 90º and stop. Finally, flip
at the top of this assembly to complete the phone clamp. This
180º clockwise, so the
Camera / Phone Knob
ball head
counterclockwise 180º. Notice the two
padded jaws
QR knob counterclockwise. As you turn this
QR
Top
Platform
top platform is locked in place. Once you
ball head. For
when converting
and pull upward on the
QR Knob
Padded
Jaws